46430-26440 46420-52210 46410-260B20 Parking Brake Cables For Toyota Hiace
46430-26440
,46420-52210
,Toyota Hiace Parking Brake Cables
This set of Japanese-grade brake cables includes three different OEM codes for Toyota vehicles. The multi-strand galvanized steel core effectively prevents rust, while the thick rubber outer jacket protects the cable from damage caused by road debris and chassis vibration.
| No. | Item | Specification |
|---|---|---|
| 1 | OEM Part Numbers | 46430-26440, 46420-52210, 46410-260B20 |
| 2 | Product Name | Automobile Parking Handbrake Cable |
| 3 | Vehicle Brand | Toyota |
| 4 | Origin Grade | Japanese Standard Aftermarket Spare Part |
| 5 | Inner Core | Multi-strand galvanized steel wire |
| 6 | Outer Jacket | Wear-resistant anti-aging rubber tube |
| 7 | End Connector | Cold-pressed integrated metal terminals |
| 8 | Dimensional Control | Strictly manufactured according to OE original drawings |
| 9 | Installation Mode | Direct bolt-on replacement without cutting |
| 10 | Mechanical Performance | High tensile strength and low elongation |
| 11 | Environmental Resistance | Resist mud, water and salt spray corrosion |
| 12 | Operating Effect | Smooth pulling without jamming or delay |
| 13 | Quality Inspection | 100% tension and reciprocating fatigue test |
| 14 | Application | Rear wheel parking brake assembly |
| 15 | Packing | Independent PE bag + export corrugated carton |

All metal terminals are firmly crimped to avoid falling off. Each cable keeps the same size and mounting points as the original parts. It can perfectly replace the old cable and restore stable parking brake performance on Toyota vehicles.

-
Q: Can these three part numbers be installed interchangeably?A: Each code corresponds to different installation positions and car models. You must select the same OEM number as your original cable instead of swapping randomly.
-
Q: What makes this Japanese-grade cable different from ordinary aftermarket items?A: It adopts stricter raw material standards. The steel wire has lower elongation, and the rubber sleeve has better anti-aging performance for long-term use.
-
Q: Do I need to adjust the cable tightness repeatedly after installation?A: The finished length fully matches OE data. Only simple fine-tuning on the brake adjuster is needed, and no trimming of the cable body is required.